www.tacticalsubmission.com

The LEO telescoping stock adapter design includes a pocket between the adapter and the shotgun receiver that accepts steel sling sloops or hook loops. These sling mounts are stamped steel with a tough mil-spec manganese phosphate finish.

A high quality push button sling swivel for slings up to 1-1/4" wide. This sling swivel will work with most standard push button sling swivel mounts and is constructed for years of use. Made in the U.S. and backed by Mesa Tactical!

The LEO telescoping stock adapter design includes a pocket between the adapter and the shotgun receiver that accepts steel sling sloops or hook loops. These sling mounts are stamped steel with a tough mil-spec manganese phosphate finish.

Those collapsible telescoping stocks are good and strong, but because they were not designed with shotguns in mind they aren't the most comfortable buttstocks. We recommend you use some kind of butt pad. These USGI-style slip-on rubber butt pads expand the butts surface area and make it easier and more comfortable to shoulder and fire your weapon.

Sling loops are designed to accept USGI standard 1-1/4” webbing.  Our hook loops and sling loops are stamped 11 gauge steel, with a mil-spec manganese phosphate finish.

Sling loops are designed to accept USGI standard 1-1/4” webbing.  Our hook loops and sling loops are stamped 11 gauge steel, with a mil-spec manganese phosphate finish.

Our steel Sling Mount Magazine Caps for the Remington 870 and Remington 1100 replace the factory magazine caps and provide forward sling attachments for three-point and carry slings. Sling loops and hook loops pivot in their mounts, which seal the magazine from water and dirt.

Mossberg rails attach directly to the receivers of late-model (1997 and later) Mossberg shotguns with pre-tapped holes. These rails can only be fitted to later-model Mossbergs featuring factory tapped holes in the receiver. All Mesa Tactical Picatinny rails are machined from 6061-T6 aircraft quality aluminum, and finished with mil-spec Type III hard anodizing. Mesa Tactical Picatinny rails include all necessary mounting hardware.

Mesa Tactical Magazine and Barrel Clamps provide mount points for Picatinny rails, weapon lights and sling attachments near the muzzle of a tactical shotgun. Both designs are CNC machined 6061-T6 aluminum, Type III anodized to military specifications. Threaded attachment points feature HeliCoil steel thread inserts for long thread life, even after repeated mounting and removal of accessories.

Our Stock Mount SureShell carriers fit on Benelli pistol grip fixed stocks. The rugged stamped steel SureShell bracket replaces the stock’s sling loop and mounts four additional shells securely on the side of the stock.

Our new PGO adapters and grips answer the professional’s desire for a breaching grip with the same robust high quality as our LEO telescoping stock adapters. Cast from aircraft aluminum, the PGO adapter accepts any AR-15 grip and features a horn at the rear to make it the most comfortable breaching style grip on the market. The adapter is available separately, or bundled with the rubber overmolded ERGO Grip®.

Recently Mesa Tactical was asked by several law enforcement agencies to produce a Picatinny rail that can be mounted on the right side of the Remington 870 and allow a weapon light to be secured behind the ejection port. This is for door breachers who need more light in tight quarters where lights near the muzzle would be unsuitable. As with all our rails, this one is machined to the MIL-STD-1913 specification from 6061-T6 aluminum, and features a mounting system similar to that of our SureShell shotshell carriers.

Our SureShell™ shotshell carriers were developed in response to requests from law enforcement agencies and armorers for shell carrier solutions that retained ammunition reliably and could withstand the rigors of daily use and abuse. Fabricated from the highest quality materials, they feature an innovative rubber friction retention system and tough construction to endure years of use and abuse. Since their introduction in the spring of 2005, they have rapidly become our best-selling accessories.

Traditional on-gun shell holder solutions require alterations to the shotgun. To make things simpler for users of our telescoping stock adapter systems, our first SureShell shotshell carriers were designed to be attached to the side mount points of our High-tube and Low-tube telescoping stock adapters. The push-button sling swivel mounting capability is still retained when a mounting point is used for a SureShell shotshell carrier, and a single telescoping stock adapter can accommodate multiple SureShell shotshell carriers at one time.

Not long ago, we were asked whether we made a sort of SureShell buttcuff for the M4 SOPMOD stocks we use with our telescoping stock kits. We’d seen these sorts of things in the past, but weren’t sure what kind of demand there would be for them. But with the modular design of the SureShell carrier, it was pretty simple to come up with a new product. And so here it is.

Our SureShell™ shotshell carriers were developed in response to requests from law enforcement agencies and armorers for shell carrier solutions that retained ammunition reliably and could withstand the rigors of daily use and abuse. Fabricated from the highest quality materials, they feature an innovative rubber friction retention system and tough construction to endure years of use and abuse. Since their introduction in the spring of 2005, they have rapidly become our best-selling accessories.

Law Enforcement Only (LEO) shooters wearing body armor, or short-statured shooters, like an AR-style telescoping stock to offer proper length of pull and versatility for close-quarters situations. This Stock Adapter is designed to let you add a telescoping stock to your Remington® 870 or 7615 and now your Mossberg 500/590!

Our SureShell™ shotshell carriers were developed in response to requests from law enforcement agencies and armorers for shell carrier solutions that retained ammunition reliably and could withstand the rigors of daily use and abuse. Fabricated from the highest quality materials, they feature an innovative rubber friction retention system and tough construction to endure years of use and abuse. Since their introduction in the spring of 2005, they have rapidly become our best-selling accessories.