www.tacticalsubmission.com

The Scope Rings tighten on the rail with a nut. The 30mm model has openings to enable the use of iron sights. They come in a set of two rings. THE CSR3 fits 30mm diameter tubes.

Set of 1" Aluminum Tactical Scope Rings weighing in at only 4.3 ounces. TA1 scope rings provide a rugged mounting platform for your scope.

Each laser sight is easily adjusted for zero with both a windage and elevation screw. The laser sight comes with a curly cord with a pressure pad remote switch.

Designed exclusively for the Aimpoint® Comp. ML 1, ML 2 and ML 3 sights.
 
Low standard height allows perfect Red Dot co-witnessing on M16/M4 with A.R.M.S.® #38™ Sleeves and S.I.R.® without a spacer. A full spacer is required if mounting directly on the flat top rail.

The #19S ACOG® is a compact single Throw Lever® base that is the same length as the built in M16 carry handle mounting platform (approx. 4") found on all ACOG® scopes.

A.R.M.S.® has succeeded in developing an ultra low profile mounting platform for the Trijicon® Reflex sight. The combination of the A.R.M.S.® repeat zero and patented Throw Lever® system and the Reflex sight provide the shooter with built in streamline appearance, function and superb fast action accuracy.

The new ATN Ultra Sight Digital Compact is designed to be a both eyes open, heads-up, rapid acquisition reflex sight. At half the size and with similar features of the regular ATN Digital Ultra Sight the ATN Ultra Sight Digital Compact is the latest innovation in the Reflex Sights world. Digital controls allow you to choose between three reticle patterns with a simple push of a button.

Patented technology keeps point of impact from shifting when you change reticles. ATN Ultra Sight Digital has 5 reticle patterns to choose from. Pattern can be changed with a push of a button.

The G-Series of LaserGrips for GLOCKTM pistols introduce an even more compact frame than traditional lasergrips, and provides instinctive grip activation while leaving the polymer GLOCK grips mostly exposed to maintain the gun's standard lightweight configuration.

This scope features the Rapid Reticle aiming system. Zero your rifle on the center crosshair at 50-yards. Below the center cross-hair are a series of clearly numbered elevation lines and dots with corresponding wind hold lines which allow the shooter to get more performance out of the .22 rifle than ever before possible.

This scope features the Rapid Reticle aiming system. Zero your rifle on the center cross-hair at 100-yards. Below the center cross-hair are a series of clearly numbered elevation lines and dots with corresponding wind hold lines which allow the shooter to get more performance out of the .17 rim-fire rifle than ever before possible.

The ATN Night Storm 1 Black is the latest in technology and the newest addition to the ATN line of Night Vision products. Strict standards and precision manufacturing have brought to you a rugged, yet lightweight, waterproof Night Vision device, which provides superior optical calibration at an economical cost.

This scope features the Rapid Reticle aiming system allowing the user to zero the rifle on the center cross hair at 100 yards. Below the center cross-hair are a series of clearly numbered elevation lines and dots with corresponding wind hold lines which allow the shooter to get more performance out of the .22 magnum than ever before. The Rapid Reticle is simple to use, fast and accurate. The Rapid Reticle is designed to work best with most commonly available 40-grain .22 Magnum rifle ammunition that runs at velocities of approximately 1825 feet per second.

Fast and accurate, and featuring the Rapid Reticle aiming system, the sight allows the user to zero the rifle on the center cross-hair at 50 yards. Below the center cross-hair are a series of clearly numbered elevation lines and dots with corresponding wind hold lines which allow the shooter to get more performance out of the .22 rifle than ever before. The Rapid Reticle is designed to work best with the most commonly available .22 Long Rifle high velocity ammunition, which runs at velocities of approximately 1200-1300 feet per second.

The Rapid Reticle™ .500S&W 1.25-4x scope is built tough to withstand the punishment the 500S&W revolver can dish out. The Rapid Reticle sighting system also allows the shooter to take those long pistol shots that would normally be passed up by hunters because they had to use "Kentucky Windage". The Rapid Reticle allows you to place the distance pin on the target, fire an accurate shot, from zero to 250 yards or meters, and hit every time. The Wind Pins will also help you to be accurate while shooting in the wind; estimate the wind velocity and the direction it is coming from and place to the correct wind pin. The end of the numbered pins is 10 mph and 5 mph at the inside pins.

The Rapid Reticle™ .44Mag 1.25-4x scope is built tough to withstand the punishment the .44 magnum pistol or revolver can dish out. The Rapid Reticle sighting system also allows the shooter to take those long pistol shots that would normally be passed up by hunters because they had to use "Kentucky Windage". The Rapid Reticle allows you to place the distance pin on the target, fire an accurate shot, from zero to 250 yards or meters, and hit every time. The Wind Pins will also help you to be accurate while shooting in the wind; estimate the wind velocity and the direction it is coming from and place to the correct wind pin. The end of the numbered pins is 10 mph and 5 mph at the inside pins.