www.tacticalsubmission.com

The Scope Rings tighten on the rail with a nut. The 30mm model has openings to enable the use of iron sights. They come in a set of two rings. THE CSR3 fits 30mm diameter tubes.

Leupold Quick-Release Weaver-Style steel mounts will accept both QRW and PRW rings. For dependability, ease of use and rock solid dependability, you can't find a better base.

Leupold Quick-Release Weaver-Style steel mounts will accept both QRW and PRW rings. For dependability, ease of use and rock solid dependability, you can't find a better base.

Leupold Quick-Release Weaver-Style steel mounts will accept both QRW and PRW rings. For dependability, ease of use and rock solid dependability, you can't find a better base.

Leupold Quick-Release Weaver-Style steel mounts will accept both QRW and PRW rings. For dependability, ease of use and rock solid dependability, you can't find a better base.

Set of 1" Aluminum Tactical Scope Rings weighing in at only 4.3 ounces. TA1 scope rings provide a rugged mounting platform for your scope.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws. CHOOSING RINGS: Ring height is determined by measuring the outside objective (bell) diameter on your scope.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws.

These solid steel rings lock down and release with just a few turns of the adjustable levers. QRW design allows you to remove and reattach a scope and return within a half-inch of the original point of impact. The rings are equipped with Torx head screws.

With the development of our Accucam Quick Detach (QD) Locking Lever System, we are now able to manufacture a full line of quick detach mounts that allow the primary optic to be quickly attached and detached from the weapon system. This provides a degree of tactical flexibility highly valued in urban combat.

The Accucam QD Locking Lever System provides you with a solid method to quickly install or remove your Aimpoint mount from the weapon system. The Aimpoint can quickly be installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. It is fully adjustable to fit Weaver and MIL-STD-1913 dovetails.